Whitey741 Posted August 16, 2012 Report Share Posted August 16, 2012 HI All, Just curious if there are any Dodge techs around. I drove into work today and when I stooped at the store around the corner, i had no reverse. Worked fine when I left the house 30 min before. All else seems to work fine. Drove on to work no problems. Some sticky valve or blown seal maybe? Any help would be appreciated Thanks, Tim Link to comment Share on other sites More sharing options...
norman Posted August 17, 2012 Report Share Posted August 17, 2012 have you tried disconning the battery maybe a sensor could be stuck some times disconning the battery will clear tne computer Link to comment Share on other sites More sharing options...
Whitey741 Posted August 17, 2012 Author Report Share Posted August 17, 2012 Thanks for the reply Norman, I Did some fishing around on the Cummins forum and after some trouble shooting, dropped the pan. Found the overdrive clutch pack retaining clip in pieces in the bottom on the magnet. Pretty common apparently. Dropped it off with a fellow/former racer here in Tomball. I sure hope he changes my overall view of transmission men. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.