8_Hobby Posted February 6, 2012 Report Share Posted February 6, 2012 what bushings do i need to put ford lower on a lmpala frame. Link to comment Share on other sites More sharing options...
Elmo Posted December 13, 2012 Report Share Posted December 13, 2012 what bushings do i need to put ford lower on a lmpala frame. I'm pretty sure when I did it I managed to put chevy bushings in. It was several years ago, I don't recommend it your uppers will also need to be much longer and your springs won't fit right. I would recommend setting up the Chevy lowers, you will be way ahead in the game. Link to comment Share on other sites More sharing options...
fastman Posted December 16, 2012 Report Share Posted December 16, 2012 ford lowers will widen your track width by .75 inch on each side. You will probly only need a longer LF upper a arm to get angles right. Your spring location will change slightly but so long as both front lower a arms a changed the spring rate may have to be increased a bit. Try increasing spring rate by 50-75 pounds or test with the springs you have now. No special bushings are needed but nylon bushings are recomended Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.