metroracer
-
Posts
783 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Blogs
Gallery
Posts posted by metroracer
-
-
-
-
No April Race Event.... Re-Scheduled for May 4th, & a Race Event for May 11th as well. Back to Back Race Events for May !!! Get-Um Ready to Rumble, Racers....
-
Just now, metroracer said:
Yah ... HMP uses the "MyLaps" Timming System, Where the Factory Stocks use mostly a "Westhold" Type of Timming System.
Just Means, The Factory Stocks are not Timed Correctly with a Correct Finishing Results & Car Counts with out using the Correct Transponders that the Track Uses....
The Correct Finishing Results Readout are Very Important for the Racers & Fans to follow the Sport....
-
Yah ... HMP uses the "MyLaps" Timming System, Where the Factory Stocks use mostly a "Westhold" Type of Timming System.
Just Means, The Factory Stocks are not Timed Correctly with a Correct Finishing Results with out using the Correct Transponders that the Track Uses....
The Correct Finishing Results Readout are Very Important for the Racers & Fans to follow the Sport....
-
In Need of a Good & Straight Steel OEM GM Metric Drive Shaft w/ Yoke = 52,1/2" u-joint to u-joint, Nice & Straight. Used OEM would be great.
I live in Houston, Texas or Close...
Thanks
-
Just in.... "RNM Installation Services" has stepped up to Title Sponsor the Outlaw Division for the 2024 Oval Track Racing Season @ HMP starting the March 9th Race @ HMP!
Good News Indeed.... ( Game Changer !!!!)
Thanks RNM Install.....
-
"
-
OK No Reply to my question.... = "Not Going to Happen..." Ok Thank You !!!
-
Yah.... I raced at Hwy-16 Raceway some in 1980 & 1981 after Meyer Speedway Closed in 1979 in Houston. I loved racing there for sure. Great Racers to race with.
The San Antonio area Does Need a real Good Modern Paved Oval Track For sure.....
I guess that is all but a Pipe Dream at best now.....
Hwy-16 / SAS was good to me for sure...... I loved that Place.....
-
5 hours ago, Double00dad said:
Transmission and shifter sold. Will make someone a good deal on clutch bearing and bell housing. Call for price
I could use the Bell Housing Only..... Will you separate? I live in Houston....
-
-
12 hours ago, Holleywood2151 said:
What are you asking for them? Also do you have shifter for them?
P/M has been sent....
-
Don't Need this Intake any more... SBC Edelbrock Performer RPM #7101 High Rise Aluminum Intake Kit.
Comes With: * 7101 RPM Square Bore Aluminum Intake Manifold, * All Needed Gaskets Included, * Chrome Distributor hold down Clamp, * Carb hold down bolts included.....
This is a Square Bore compatible High Rise Intake Manifold.\
Located in Houston, Texas
$150.00 firm
Thanks
-
On 1/15/2024 at 5:08 PM, Holleywood2151 said:
Have you sold it
Thanks Uncle Nick....
Yes I Still Have it available.... I have a that Black One Still Available, & a Red One just like it as your choice....
Thanks for your interest....
-
1 hour ago, arob said:
You would think some of the best drivers around would have learned by now bumping in the turns at Daytona is not going to have a good result.
Right.... "You would Think So...", But in this case I think that there was a Rookie Wildly Wiggling Around pretty Much bumping / pushing cars. That takes Skill. Bump Drafting & Side Drafting is a very useful old school tactic to get runs on the other line of cars so to speak. (But With Skill....)
It is very fun to watch, if it is executed PROPERLY.... To avoid "The Big One...."
-
Another High Drama Racing Event on the High Banks of Daytona Int. Speedway.....
Lots of Great Racing.... , the Big One, Drivers Making the Playoffs & Others Not Making the Playoffs, Race Cars Barrel-Rolling, & Lots, Lots of Cars torn up all most as Usual !!!
& YIPPI.... Harvick Makes the Playoffs.... Wallace is in, But Elliot is Out....
Good Race, But Typical Daytona Bump Drafting Incidents as usual....
-
12 hours ago, HiTech said:
THE 7 car has not race all season ..the owner has been doing some other things . needed done .. . .but the timing of this race fits right in .. just freshened the motor up today ,first time working on this car sense last season .. .. being old paved racers we are excited for the first time this year to put the car on the track .... .. . jessie and i talked about setting the car up for houston .. i think we have what we need ... least of all it would be fun to burn some rubber see some heat built up on those slicks that helps the tires stick .. heating them up on dirt isnt all that great when dirt is going stick to them .
that's All Good Mr. Mike.... But I sure would check with Mr. Owen to see if they are going to Allow those 10" F-45 Hoosiers, HMP runs 8" American Racer Asphalt Slicks..... I don't know, But I sure would check that out before I made the Trip. Better to be safe than sorry... Hope info helps...
-
Get those Factory Stock Rides Ready for Racing @ HMP soon...
-
Attention: All Local & Texas Area FACTORY STOCK RACERS..... The Oval @ HMP / SPRS has added the Factory Stocks to the Racing Event @ HMP on 9/23/2023
Calling all Interested Local Factory Stock Racers are being Invited to Race at HMP Oval Track in N/E Houston, Texas on 9/23/2023....
So get those Cars "Ready to Rumble" on the High Banks of HMP real soon....
Check with SPRS for more Event info & Rules info as well..
>>>>> Factory Stocks Racing @ HMP real soon.... <<<<
-
-
1 hour ago, rails said:
Where do you find out this information?
on the HMP F/B page Sir.... Hope info Helps!
-
As Member Hi-Tech had Predicted a while back that the New HMP Promoter "Will" bring in the Factory Stocks to compete at HMP sooner or later.....
I personally "Scoffed at", "Dreaded", & "Totally Dis-Agree With" that Idea at best...
But I am seeing now that HMP is Pursuing that Deal, and is Formally giving a shout out & a welcome For Factory Stocks to come and compete at the next race at HMP September 23....
I don't know if that will be a one off type of race, or to be a Regular racing class there at HMP in the future....
I guess time will tell....
-
Some of the Seens at Meyer Speedway in 1979, The Track Closed for ever shortly after these Pic's were taken in the Summer of that Year.
Great Times, Great Racers & Dedicated Racing Fans, Great Track Owner & Promoter......
The Opening of Big-H Speedway in 1978 was some what some of the Issues leading the Closing.
Thanks for Looking....
Talladega Finish
in Texas Auto Racing
Posted · Edited by metroracer
That Criss-Cross Track Swerve Blocking Techniques can be a Little Bit Tricky some times as in this case, Coming to the line..... = No Body is Lifting !!!! Heartbreaking, I know....