StacyRacing Posted January 5, 2014 Report Share Posted January 5, 2014 SOS will be following the 2014 IMCA Modified rules with a few exceptions. Exceptions: 1. Quick change rear ends will be allowed but will be sealed during prerace tech. 2. USMTS body rules will be allowed. 3. Crate 604 motor is allowed a 7" spoiler 4. Open motors are allowed a 5" spoiler These rules allow us to get a start for the season. Adjustments will be made as necessary during the season to help maintain competition. Thanks, Keith Stacy Link to comment Share on other sites More sharing options...
cagle69motorsports Posted January 5, 2014 Report Share Posted January 5, 2014 Just to clarify the OPEN MOTOR is the IMCA Open Motor.....USMTS/USRA Engines or Late Model engines are not allowed..... Link to comment Share on other sites More sharing options...
poorboyracin Posted January 5, 2014 Report Share Posted January 5, 2014 Will the American racer kk704 be allowed and also is grooving of the tire allowed? Link to comment Share on other sites More sharing options...
Wayne Walker Posted January 5, 2014 Report Share Posted January 5, 2014 And it starts....... Link to comment Share on other sites More sharing options...
poorboyracin Posted January 5, 2014 Report Share Posted January 5, 2014 I was just asking bout the tires cause that's what I have and if they don't allow it then I will buy the Hoosier g60. Link to comment Share on other sites More sharing options...
sm44 Posted January 5, 2014 Report Share Posted January 5, 2014 They posted on facebook no American racers, only Hoosier g60, imca says no grooving so I would assume no grooving. Link to comment Share on other sites More sharing options...
StacyRacing Posted January 5, 2014 Author Report Share Posted January 5, 2014 14. TIRES/WHEELS: Must use unaltered Hoosier Race tire, G60-15 with IMCA stamped on sidewall. No chemical softening, conditioning, or grooving of tires (refer to www.imca.com for automatic penalties). Tires may be ground or siped within confines of tread (not past factory straight line). No re-caps. All wheels must display white ‘IMCA approved’ decal and wheel manufacturer decal. Aluminum, composite or steel spacers allowed. May use IMCA approved bead lock, on right rear only. External, steel bead lock only and it cannot make wheel any narrower than eight inches and no wider than 8.75 inches. Must use only steel bolts. Foam type or plastic outer mud cover allowed on right side wheels. Inner mud cover allowed on left rear only. Rim-mounted bleeder valves allowed. Steel lug nuts only. Here is the tire rule as written in the 2014 IMCA Modified rules. SOS will not require the IMCA stamp, that is the only difference allowed. Keith Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.