dirttrackdog Posted June 30, 2013 Report Share Posted June 30, 2013 need help on alignment set up on pure stock. keep rolling r/f tire Link to comment Share on other sites More sharing options...
72MT Posted July 1, 2013 Report Share Posted July 1, 2013 How much camber u got Link to comment Share on other sites More sharing options...
dirttrackdog Posted July 1, 2013 Author Report Share Posted July 1, 2013 How much camber u got factory spec this is the first time this car has seen a track Link to comment Share on other sites More sharing options...
poorboy Posted July 1, 2013 Report Share Posted July 1, 2013 get the right front to about 3 degrees negative and see what happens from there. Link to comment Share on other sites More sharing options...
thumper Posted July 1, 2013 Report Share Posted July 1, 2013 There were a lot of tires rolled off Sat.Usually it is a product of low air pressure but some had over 20 pounds.Old tires seemed to be the worse.Fresh rubber grips better.Be sure the rim has a good bead retention bump.I also paint my beads before airing up.If allowed the Basset rims work the best,thats what I run on rights.As a driver its important to try to hit ruts as straight as possible.I saw over a dozen flat RFs after the heats. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.