matt5858 Posted April 21, 2011 Report Share Posted April 21, 2011 I have 76 nova lower a arms and the spindle has been drilled and tapered for bigger ball joints! My question is what kind of ball joint will press into the control arm and has a bigger raised tapered stud? Any help please! Thanks! Link to comment Share on other sites More sharing options...
Double D racing Posted April 21, 2011 Report Share Posted April 21, 2011 Chrysler???? Link to comment Share on other sites More sharing options...
bret90 Posted May 30, 2011 Report Share Posted May 30, 2011 I have 76 nova lower a arms and the spindle has been drilled and tapered for bigger ball joints! My question is what kind of ball joint will press into the control arm and has a bigger raised tapered stud? Any help please! Thanks! check the info at http://www.cmwraceparts.com/CAP-Lower-Ball-Jnts.php You could either run a weld in the adapter for a screw in or run a 71-76 impala lower. same as nova but with bigger hole for balljoint. Link to comment Share on other sites More sharing options...
poorboy Posted May 31, 2011 Report Share Posted May 31, 2011 I think your looking for the K6117 Moog Link to comment Share on other sites More sharing options...
wiggly Posted June 13, 2011 Report Share Posted June 13, 2011 I think your looking for the K6117 Moog But those may not directly fit in the original ball joint hole. You may have to take some 2" Sch. 80 pipe and have your favorite machinist trim the ID and OD to fit. Look in the Speedway catalog for the spacer dimensions. The spacers are about 10 bucks there, but I have (1) friend and access to pipe. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.