CC57 Posted April 9, 2009 Report Share Posted April 9, 2009 OK, I know there has go to be a better way than the way I've done it over the years: put belt over lower pulley and as much top pulley has I could. Then rotate the pulley one fan blade at a time until the belt pops on. What do y'all do? Bump the motor over a bit at a time? Install both upper & lower pulleys with loose bolts and gradually tighten the bolts, moving between both pulleys? Or ....? Thanks Quote Link to comment Share on other sites More sharing options...
poorboy Posted April 9, 2009 Report Share Posted April 9, 2009 I loosen the bolts on the water pump pulley and let it cockover a little then roll the belt on. It's always to tight to do it without loosening the pulley. Quote Link to comment Share on other sites More sharing options...
sm44 Posted April 9, 2009 Report Share Posted April 9, 2009 I loosen the bolts on the water pump pulley and let it cockover a little then roll the belt on. It's always to tight to do it without loosening the pulley. X2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.