chrisdavid Posted April 19, 2010 Report Share Posted April 19, 2010 We just replaced our rear end gear in our Pro Truck. We are running a 7.5" GM 10-Bolt with a 3.73 thick gear. We were confused on how much rear end gear lube to put in. We filled it up with about 3qts. When we ran for the first time after replacing the breather tube had "blown" out gear lube. I don't know why, but the entire evening it seemed to produce a bit more. Did we over fill it and it overflowed? Is this common. The truck ran fine and doesn't seem to have any drivetrain issues. Just want to make sure we didn't develop a problem. Thanks, Chris David #52 Pro Truck HMP Link to comment Share on other sites More sharing options...
Truck99 Posted April 19, 2010 Report Share Posted April 19, 2010 Chris, you put in 1 quart too much. Link to comment Share on other sites More sharing options...
j.j.&s.racing Posted April 19, 2010 Report Share Posted April 19, 2010 good to know Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.