CC57 Posted October 31, 2009 Report Share Posted October 31, 2009 Can anyone provide me with the name of a shop in the Houston area that can do header repair? Thanks all Link to comment Share on other sites More sharing options...
LM-RACER-20 Posted October 31, 2009 Report Share Posted October 31, 2009 Whats wrong with them? I'm not from Houston so I dont know anyone, but maybe I could give advice. Link to comment Share on other sites More sharing options...
CC57 Posted October 31, 2009 Author Report Share Posted October 31, 2009 I have a fairly substantial gap between the header mouting flange and the header tube at the #2 position. Apparently there was/is some stress on the header in this area as I already had a crack repaired (welded) in this area. And there is considerable tension when I try to push the header tube back into position. Link to comment Share on other sites More sharing options...
LM-RACER-20 Posted October 31, 2009 Report Share Posted October 31, 2009 yea, mine were cracking too. I just welded it myslef and fixed it. But it wasnt pullng away from the flange. Good luck finding someone. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.