Jump to content

tranny rebuild


F5RACING

Recommended Posts

Think you might be right. The solid mount doesnt allow for any movement. Disconnected mount and seemed to go away for the most part. Just a little slippage due to lack of fluid, but fluid level looks to be ok.

running a auto might brack case with no mount , check ujoints , be sure there free in all movement

Link to comment
Share on other sites

Vibration was with tranny in park and nuetral on initial start up. Seems to have stopped, but is not shifting smooth. it als has a slight hesitation when putting into drive. Mounted two small coolers on top of roll cage at head level. Lines were cleared, but not sure if fluid is circulating properly through coolers. what should the prtessure be at?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...