getzum Posted April 3, 2018 Report Share Posted April 3, 2018 Here are a couple of important notes along with the 2018 class rules. The tech bulletin below is not in the current rule book so please be aware of the info. Tech bulletin It was brought to our attention that some spoilers have been constructed from sheet metal. We are going to allow sheet-metal spoilers as long as they fall within the measurement guidelines. Also Allison Legacy, who we are not affiliated with but do try to keep our rules as close as possible to their rules, has approved Afco shocks as a replacement shock. That shock part # is 1564. Therefore we will allow this shock as a replacement shock along with the QA1 7564 shock. The Afco shock was not added to the 2018 rule book but is allowed for the 2018 and beyond seasons. LSL Rules 2018 (1).docx LSL Rules 2018 (1) - Shortcut.lnk Link to comment Share on other sites More sharing options...
direct-flo Posted April 4, 2018 Report Share Posted April 4, 2018 Folks should probably take those heavy gauge aluminum (non flexing) spolers off and make some out of thin sheetmetal. They are legal as long as the measurments are the same? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.