Jump to content
Sign in to follow this  
da6212

Spring question

Recommended Posts

depends on where you race, edna can run single. not of rules at STS or I37

Share this post


Link to post
Share on other sites

 

Most definitely Shannon.

What exactly is the advantage?

 

 

more to chose from in spring rates in the single pigtail than double, stock mounts are for double .so you will have to change spring perch to use single

Share this post


Link to post
Share on other sites

 

 

 

Most definitely Shannon.

What exactly is the advantage?

more to chose from in spring rates in the single pigtail than double, stock mounts are for double .so you will have to change spring perch to use single

Which has to remain stock!!!

Share this post


Link to post
Share on other sites

 

 

 

 

Most definitely Shannon.

What exactly is the advantage?

more to chose from in spring rates in the single pigtail than double, stock mounts are for double .so you will have to change spring perch to use single

Which has to remain stock!!!

 

Bingo!!!!

Share this post


Link to post
Share on other sites

 

 

 

 

 

Most definitely Shannon.

What exactly is the advantage?

more to chose from in spring rates in the single pigtail than double, stock mounts are for double .so you will have to change spring perch to use single

Which has to remain stock!!!

Bingo!!!!

Share this post


Link to post
Share on other sites

Yep double edge sword, tell ya you can run a single pigtail, but tell you to leave everything stock. Guess that is one for the tech man to decide on. You could always make an adapter plate to fit the stock perch, therefore you are following the rules to the letter, just one of the little knit-picking things. But if you stay within the height requirements and at least one pigtail on the spring all should be fine.

Share this post


Link to post
Share on other sites

Yep double edge sword, tell ya you can run a single pigtail, but tell you to leave everything stock. Guess that is one for the tech man to decide on. You could always make an adapter plate to fit the stock perch, therefore you are following the rules to the letter, just one of the little knit-picking things. But if you stay within the height requirements and at least one pigtail on the spring all should be fine.

But is an altered spring perch still stock?

Share this post


Link to post
Share on other sites

If rules state that a certain spring is "Legal". Then one can only assume that Tech would allow the proper perch for that spring. As long as a stock perch was replaced/installed for that springs use. Adapter's or any other obvious homemade or aftermarket part modifications would most likely not be acceptable. Another hint of grey that needs further clarification. JMO

Share this post


Link to post
Share on other sites

At the bottom there says a little something about suspension. That should end the spring perch question I'm sure no one is running anything altered.

post-15077-0-77010900-1493927008_thumb.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×