Jump to content

South Texas Shootout poster here


NickHolt

Recommended Posts

PURE STOCK/ FACTORY STOCK RULE EXCEPTIONS FOR 2016 SHOOTOUT

BODY:

All cars must have complete OEM steel roof mounted in OEM location with OEM rake and angle for model.

ALL openings shall be covered to isolate driver from track –subject to track approval.

Aluminum body panels allowed, all panels must be rounded and resemble stock body.

NO FLAT SIDES – bodies will be heavily scrutinized.

SUSPENTION:

Shocks:

The following steel bodied factory welded shocks are allowed in OEM stock mounting position.

• PRO - SS100, SS201 and SS200 Street Stock

• QA1 - EC Series Stock Mount

• AFCO - 10 Series Street Stock Mount

• DOETSCH TECH – 0101, 0102 & 0103 Street and Hobby Stock

• OEM or OEM replacements (No OEM Bilstein)

REBUIDABLE SHOCKS NOT ALLOWED – Example QA1 53 Series

Aftermarket steel springs allowed, minimum 5 inch OD, may not exceed 15 inches in free height.

Rebuildable ball joints –OK

Aftermarket brake pedal with single master cylinder - OK

ENGINE:

Maximum cranking compression – 175lbs

Aluminum waters pumps – OK

Weight – With Driver

Minimum – 3250lbs.

Maximum rear percentage - 50%

TIRES:

Hoosier asphalt takeoffs – 1070, F45, F50, F56, F40 allowed only on front.

Must durometer 51 or higher.

NO bleed off valves.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...