NickHolt Posted October 9, 2015 Report Share Posted October 9, 2015 Engine Exhaust System: All parts of header and exhaust pipe must remain stock in the stock location as manufactured by Allison Brothers. Optionally, the exhaust/tail-pipe system manufactured by Huff Industries may be utilized. Neither system may be altered from its manufactured configuration. The Allison system exits below the body panel in front of the right rear tire, while the Huff systems exits through the body panel in front of the right rear tire. Right-side tail-pipe turn-out is mandatory in either system. To help prevent exhaust fumes from entering the driver's area, the end of the exhaust system must protrude beyond the body panel by a minimum of 1/4-inch but no more than 1-inch. Engine exhaust system may be painted, coated or wrapped with a high temperature coating. Link to comment Share on other sites More sharing options...
NickHolt Posted October 9, 2015 Author Report Share Posted October 9, 2015 A couple of pics of the optional Huff Industries exhaust exit location Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.